WE CAN REPAIR BORES FROM 40mm- 1 METRE DIAMETER
|
ON SITE SERVICES WE PROVIDE:
- LINE BORING - INTERNAL DIAMETER WELDING - FACE WELDING AND REPAIRS - FACE MACHINING - FLANGE FACING - BROKEN TAP/STUD REMOVAL - SPARK EROSION - ACOUSTIC ALIGNMENT - BUSH AND BEARING INSTALLATION |
WHAT IS LINE BORING, HOW DOES IT WORK?
Mobile line boring is a process by which very heavy machinery - too heavy or too costly to move to a machine shop - can be repaired in the field, restoring bearing bores and pin Inside Diameters, to factory specifications. It's also an excellent method for new manufacturers to bore almost any size bore, at any angle, to very close tolerances.
This is a diversified method of precision boring. It is fast and precise, and the degree of accuracy gives superior results. The onsite repair capability saves expensive downtime and transportation costs, so these advantages make line boring very cost-effective.
Used properly, mobile line boring can eliminate the need for boring mills to bore inside diameters. It is less expensive and faster than any other method for repairing very large machinery!
|
|
|
LINE BORING PROCESS
We take your equipment back to OEM (Original Equipment Manufacturer) factory specification and adhere to all the OEM tolerances.
Machining is carried out in conjuntion with an alignment technique using sound equipment for 100% alignment accuracy which is essential to the success of the project. Where main bearing bores are worn and outside the OEMs design parameters, bores can be repaired to re-instate them back to standard size.
This can be done with a process of welding the internal diameter of the bore using specialized automated bore welding equipment, then machine the size back to the required specification. Another option, if for some reason welding is not possible, is to machine the worn bore oversize, fit a sleeve and then line bore to the design size, although this option is rarely used.
Worn faces can also be repaired by building up material with weld and face machining it back to standard specification using the appropriate cutting attachments.
Line Boring Solutions Perth take pride in the fact that we do quality, professional work at a fair price.
We take your equipment back to OEM (Original Equipment Manufacturer) factory specification and adhere to all the OEM tolerances.
Machining is carried out in conjuntion with an alignment technique using sound equipment for 100% alignment accuracy which is essential to the success of the project. Where main bearing bores are worn and outside the OEMs design parameters, bores can be repaired to re-instate them back to standard size.
This can be done with a process of welding the internal diameter of the bore using specialized automated bore welding equipment, then machine the size back to the required specification. Another option, if for some reason welding is not possible, is to machine the worn bore oversize, fit a sleeve and then line bore to the design size, although this option is rarely used.
Worn faces can also be repaired by building up material with weld and face machining it back to standard specification using the appropriate cutting attachments.
Line Boring Solutions Perth take pride in the fact that we do quality, professional work at a fair price.
|
|
"Give us a call on 0429114560" |
